Compu-Flow™ Smart-Mag Magnetic Single-Point Insertion Flow Meter
Compu-Flow™ introduces the technologically advanced industrial-grade magnetic single point insertion flow meter for superior flow measurement: The Compu-Flow™ Smart-Mag. The revolutionary new and enhanced hardware and software design results in a low-profile, high performance flow meter that delivers precise flow readings due to it’s advanced proprietary micro-processing technology. Compu-Flow™ introduces the first in its class Smart-LED indicators to immediately know what your flow is doing at-a-glance. Stainless-steel probe with stainless-steel electrodes are mounted in teflon for extended service life. Upper housing and all hardware is either PVC or stainless-steel.
The Compu-Flow™ Smart-Mag produces a rapidly reversing magnetic field in the probe, and as the fluid moves through this field a voltage is generated. This tiny voltage is measured and translated into a frequency signal that is proportional to flow rate. This digital signal can be sent directly to a PLC or other control or can be converted using any of the Compu-Flow™ indicators or receivers. Signal cable is standard 25’, optional to 1000’.
The complete lack of moving parts in the Compu-Flow™ Smart-Mag flow sensor is the source of its reliability. There is no rotor to stop turning as in dirty water and there are no bearings to wear out. Stainless hardware probes withstand a variety of temperature, pressure, and chemical conditions. Reverse flow-output and submersible models are optional.
The Compu-Flow™ Smart-Mag is truly Flow Smart.
- Quick & Easy Installation: Installation time from start to finish is typically 30 minutes.
- User-Friendly: Engineered with an extremely easy to use interface. No math or formulas required.
- High-performance: Out-performs competition in accuracy and reliability. Guaranteed. NIST Certified to < 0.5%.
- Compu-Flow™ Smart-Flow Technology: Proprietary technology delivers best-in-class flow readings.
- Compu-Flow™ Smart-LED Indicators: Immediately know what your flow is doing at-a-glance.
- Lightweight & Low Profile: The Compu-Flow™ Econo-Mag is the first in its class to provide a revolutionary lightweight & low profile hardware design. The future of magnetic flow meters is here. Custom probe lengths optional.
- Multi-industry clean flow measurement solution: Engineered to measure virtually all water based flows in most industries.
- Rapid Response Time: Instant accurate flow readings. Get down to business, fast. Selectable update times.
100-240 VAC @300mA-12VDC
Digital Pulse Train (0-12V)
4-20mA (MAX z1200 ohm) RS232 via DB9 Port
Hi-Low Limit Alarms * Batch Control *
* (12VDC @50mA)
FPS: 0-50 fps/ 15 mps
Resolution .1 fps, 0.03 mps
PIPE ID RANGE:
0 – 999 Inches
0 – 9999 mm
1% (function of flow profile)
NEMA – 4X hinged IP64 (+4°F to + 140°F)
7.75 X 4.25 X 2.50 inch
4 lbs. -C6D System
8 lbs. -C6P System
Green – Power Yellow – Echo
Red – Hi/Low Alarm
POWER: 12VDC- @ 0.5 watt/ 40mA Submersible 200’ Max
Potted IP68 Non- Metallic
Temp (-70°F to +185°F)
500°F – Heat Sink Option
12 Digit LCD
Memory Backup 99 yrs +
4 Digit LCD Digital Bar Graph
Nonvolatile 99 yrs + all parameter inputs
0 to 5000 ft.
25 ft. standard
Wireless Signal 900 mHz
Data Logger 1- 32 GB
Flash Drive Internal or Remote
English & Metric
NEMA 4X display
Transducer & 25’ cable
Sensor Coupling Hardware
Quick Start Guide
USB Flash Drive / User Manual
All of the above plus:
12V 1.0AH AGM Battery
90/240 VAC/12VDC@ 1.0A Smart Charger
Field Transport Case
Quick Connect Flow Sensor Port
2 Year Limited Warranty
Advanced Flow warrants all Compu-Flow™ products for a period of 2 years from date of purchase to conform to the published specifications and to be free from defects in materials and workmanship.
This warranty is limited to repair or replacement of parts or products at the option of the manufacturer. Advanced Flow is not responsible for product damage caused by use or misuse nor will they assume liability for any unauthorized repairs, modifications, or installations by other than their personnel or representative. Products to be returned to the factory for warranty repair must have prior approval from Advanced Flow. Liability will not be accepted for unauthorized returns. No liability will be accepted for damages to customers equipment and/or materials due to use or misuse of the products nor for any loss of profits or other special damages.
This warranty is expressly in lieu of any other warranty or merchantability of fitness for a particular purpose. The remedies of repair or replacement as set forth above are the only remedies under this warranty. Advanced Flow disclaims any obligation or liability for loss or use of the product warranted, loss of time, inconvenience, commercial loss or any other direct, consequential, special, or incidental damages. This warranty is in lieu of any other obligation or liability of Advanced Flow of any nature whatsoever.